Path:
, Smart Night Purge, Setup page
|
Path: |
|
|
|
|
|
Purpose |
This page lets you set Smart Night Purge parameters. Enter:
|
|
Description |
- |
|
What to do first |
- |
|
What to do next |
Start Smart Night Purge from the Dashboard page |
|
|
Settings can also be edited while Smart Night Purge is running. |
Setting descriptions
| Parameter | Description |
|---|---|
|
MASTER - Unit status |
Variable that manages Master conditioner on/off status |
|
MASTER - Unit ON/OFF control |
Variable that manages Master conditioner on/off control |
|
Number of Slaves |
Number of Slave conditioners (from 1 to 3) |
|
SLAVE 1/2/3 – Unit status |
Variable that manages Slave conditioner 1, 2, 3 on/off status. |
|
SLAVE 1/2/3 - Unit ON/OFF control |
Variable that manages Slave conditioner 1, 2, 3 on/off control |
|
Internal temperature |
Variables that read internal temperature |
|
Outside temperature |
Variable that reads outside temperature |
|
Internal humidity (*) |
Percent internal humidity (manually entered or selected by the variable) |
|
Outdoor humidity (*) |
Percent outdoor humidity (manually entered or selected by the variable) |
|
Temperature set point |
Internal temperature set point (manually entered or selected by the variable) |
|
Humidity set point (*) |
Internal humidity set point (manually entered or selected by the variable) |
|
Temperature set point differential |
Margin of tolerance from set point (deadband) |
|
Humidity set point differential |
Margin of tolerance from set point (deadband) |
|
Maximum unit on time |
Maximum free cooling length, from sunrise |
|
Fan consumption (free-cooling mode) |
Master and relevant Slave conditioning unit energy consumption in free cooling mode (inferred from factory default value) |
|
Fan capacity |
Fan capacity (inferred from factory default value) |
|
Plug-in deployment start date |
Date of action/service start in Smart Night Purge |
|
Plug-in deployment end date |
Date of action/service end in Smart Night Purge |
|
Free-cooling end time action |
Maximum free cooling end time, meaning sunrise (manually enter the time or have it automatically read by GeoLighting) |
|
|
Note (*): in lack of an indoor/outdoor humidity probe, set all three fields to 50. This enables free cooling for temperature values and not enthalpy. |
Action
|
|
Warning: customizations that are not saved are automatically deleted when the function is closed. |
Other actions
|
|
Adding a new algorithm customization. |
|
|
Deleting the selected customization. |
See also
Smart Night Purge: introduction
PlantVisorPRO Locale 2.2.0 -
